|
 |
FP7000
 Very Economical
Wide Chemical
Compatibility
High Level Pulse
Outputû No Amplifier Needed
The NEWPORT FP7000 paddlewheel flow sensors are ideal
for accurate monitoring of typical industrial water flows, hard-to-handle
corrosive aqueous solutions, and high purity fluids (see "Wetted
Materials" for details). The FP7000 utilizes a paddlewheel-like
rotor whose motion is converted into a high-level square wave pulse
output by an open collector Hall effect sensor. Pulse amplitudes
from 5 to 18 V are possible, depending on input power. The FPW-15
115 Vdc converter plugs directly into a wall socket and outputs
400 mA at Vdc.
|
| The INFCTRA
Series panel meter supplies power for the flow sensor and provides
rate indication, or totalization, and batch control (when ordered
with the dual relay option). When ordered with the analog output
option, the INFCTRA can be used to interface the FP7000 flow signal
to such items as strip chart recorders, dataloggers, and computer
interfaces. The system consists of the flow sensor, an installing
fitting, and electronics. The PVC tee fittings are supplied with
a PVC locking nut, and the galvanized iron tee fittings are supplied
with a brass locking nut to provide a secure metal-to-metal mounting
to the threaded brass insert. |
 |
The FP7000 is not compatible with FP-5300 or FMG-5300 Series installation
fittings. When powered by the FPW-5 five Vdc wall socket converter, the
FP7000 has a TTL level pulse output which can be used with a variety of
pulse input flow indicators, signal conditioners and controllers. It is
not compatible with the FPM 730/740.
INFCTRA Series compatible
indicators, for flowrate, or total or batch control, sold separately. |
Available with PVC
or galvanized iron fittings |
SPECIFICATIONS
Accuracy: ▒2% of full scale
Repeatability: ▒1% of full scale
Power: 5 to 18 Vdc @ 10 mA maximum
WETTED MATERIALS
FP7000 Series sensor
polypropylene body
(PVDF), PVDF paddle,
Viton®
O-ring, 316SS
shaft (PVDF optional).
Galvanized iron tee
includes brass insert
and locking nut. PVC
tee has PVC insert
and locking nut.
Fluid Temperature/Pressure Range
Do not exceed the maximum ratings of your piping. Depending on the material
of the fitting, the operating temperature/ pressure may be limited by
your piping, and not by the sensor. For all PVC tee fittings, do not exceed
150 PSIG @ 27ºC (80ºF), 100 PSIG @ 38ºC (100ºF), 60
PSIG @ 49ºC (120ºF) 30 PSIG @ 60ºC (140ºF), due to
the insert in the tee.
FP7000 sensor
0-26ºC (32 to 80ºF) up to 150 PSIG; max. pressure decreases
1.1 PSIG per each 1ºF above 80ºF for a max. temperature of 200ºF
at 18 PSIG max.
Frequency Output
Nominal 1 Hz/fps. amplitude of open collector pulse = Vdc input power
Cable Length: 2.4 m (8 feet)
WEIGHT
FP7001: 0.2 kg (1/2 lb)
FP7030GI: 2.8 kg (6 1/4 lb)
FP7030: 4.3 kg (9 1/2 lb)
FLOW
SENSOR SPECIFICATIONS
|
Model No.
|
Description
|
Price
|
|
FP7001
|
Polypropylene body/316SS shaft |
$200
|
Comes with complete
operatorÆs manual.
INSTALLATION FITTINGS (Includes Locking Nut)
|
Model No.
|
Lay Length
|
Price
|
|
Model No.
|
Pipe Size
|
Range (GPM)
|
Price
|
|
FP7007
|
21"
|
$77
|
|
FP7007-GI
|
3/4"
|
2-30
|
$125
|
|
FP7010
|
26"
|
$77
|
|
FP7010-GI
|
1"
|
3-50
|
$110
|
|
FP7012
|
31 1/4 "
|
$80
|
|
FP7012-GI
|
1 1/4"
|
5-90
|
$110
|
|
FP7015
|
37 1/2"
|
$90
|
|
FP7015-GI
|
1 1/2 "
|
7-125
|
$100
|
|
FP7020
|
50"
|
$100
|
|
FP7020-GI
|
2"
|
11-205
|
$105
|
|
FP7025
|
62 1/2"
|
$105
|
|
FP7025-GI
|
2 1/2"
|
15-285
|
$150
|
|
FP7030
|
75"
|
$125
|
|
FP7030-GI
|
3"
|
25-460
|
$170
|
Ordering
Example:
To purchase a complete system, order:
1) Flow Sensor
2) Installation Fitting
3) Electronics
Example: FP7001
sensor (polypropylene
body/316SS shaft),
FP7012 PVC installation
fitting, plus INFCTRA
panel meter, $200 +
80 + 260 = $540.
|
